Assembly of the Ornate Jewellery Box
17 Nov 2025,
Introduction
The ornate jewellery box parts are crafted from laser-cut 3mm Poplar plywood, which may result in smoke marks on the wood’s surface. A light sanding with fine-grit sandpaper is recommended to smooth out these marks. Dry assemble the parts before gluing, then apply a good-quality PVA wood glue, using a set square to ensure a precise 90-degree angle.
Step 1
 |
||
Step 2
 |
||
Step 3
 |
||
Step 4
 |
 |
|